How to apply our vinyl stickers?

Instructions for proper application.

1. Prepare a room with a temperature of 20°C or above.

2. Wipe the surface with non-sticky wipes.

3. Use ethyl alcohol to remove any grease from the

surface.

4. Accurately measure the area to be applied.

5. Calculate the area to be applied.

6. Remove any grease from the surface of the area to be applied with a clean cloth moistened with ethyl alcohol.

Before removing small parts from the backing,

press the transfer film firmly onto the stickers.

Make sure the small parts adhere to the transfer film.

After this, the transfer film can be easily removed after transferring to your device.

7. Remove the protective film from the back of the sticker, exposing the adhesive side.

8. Apply the sticker to the desired surface and secure it in place.

9. Wait approximately 24 hours.

Caution:

No need to test the strength!

For good adhesion, allow 2-3 days.